MADI-X8

13/09/2010 02:16 AM

The Heart of your Intelligent Audio Network
MADI-X8 is an affordable, powerful and versatile 8 port MADI routing system. In addition to offering simple point to point bulk routing, MADI-X8 offers Source Distribution (one source to many destinations), Device Splitting (any combination of individual channels to any destination) and Source Aggregation (a single 64 Ch output consists of any combination of channels from various inputs). MADI-X8 is therefore a unique low cost solution to audio distribution and aggregation challenges in a wide range of applications including; Broadcast Production Studios and OB Vehicles, large scale Film/Game Scoring, multi room studio complexes requiring real time asset sharing and Live Sound.

The MADI-X8 is a 1U unit with 8 MADI I/O. It provides a 512 x 512 point routing matrix controlled by cross-platform SSL Logictivity™ Browser software. The Browser makes creation of even the most complex routing configurations very straightforward. The MADI-X8 hardware can store up to 128 Presets and continues to function when the Logictivity™ Browser is disconnected. MADI-X8 can act as a Master clock source or as a clock distribution system via its MADI and/or Word Clock connections. It has Intelligent Clock Sensing with Auto Failover which can monitor both a Primary Master Clock and a Secondary Clock source and switch automatically should the Master Clock source fail. Up to four MADI-X8 units can be controlled by a single browser and multiple browsers can control a single MADI-X8 over a wired or wireless network.

Key Features

8 MADI I/Os (6 x Optical and 2 x Coax). 1 xWordclock In, 3 xWordclock Out
Versatile Point To Point, Source Distribution, Source Splitting and Source Aggregation
Straightforward set up via Intuitive cross platform Logicitivty™ Browser software
Preset based recall of partial or full routing set ups
Ethernet browser connection. Controllable over Wi-Fi and Internet
Efficient and simple Network setup using Multicast DNS Auto Unit Discovery (Bonjour)
Logictivity™ browser can access up to 4 MADI-X8 Units simultaneously
Multiple Logictivity™ enabled MAC’s and PC’s can access the MADI-X8 simultaneously
Dual Master Clock Source (Internal,Word Clock or MADI Input A-H) with Auto Failover
512 x 512 Ch@48kHz, 256 x 256 Ch@96kHz, 128 x 128 Ch@192kHz cross point matrix
Independent MADI Mode Operation (56/64 CH Mode, Legacy/Frame Pattern) per MADI I/O
Full preservation of ‘Control over MADI Data’ (depending on the Data Protocol)
Support for Varispeed (+/–10%Varispeed on 56CH Ports only)
Ultra Low MADI Roundtrip Latency; 4 samples (44.1/48Khz), 8 samples (88.2/96Khz), 16 samples (176.4/192Khz)

http://www.solid-state-logic.com/broadcastsound/xlogic%20madi-x8/index.asp

Tags:SSL, digital, Routing, MADI

XR727 STEREO EQ modul

02/08/2010 11:31 AM

The X-Rack Stereo EQ Module is a stereo version of SSL’s console Channel EQ. It is a classic SSL four-band parametric EQ that is a superb all round frequency adjustment tool kit. Whether you need pinpoint accuracy for surgical problem solving, smoother broader sound shaping, or a little more aggressive character the SSL Stereo EQ will give you what you need. This is a fully featured EQ with high- and low-bands switchable between shelving or fixed Q bell curves and two mid-bands each with variable Q control. This stereo version introduces a ‘Selective Mode’ switch which enables independent switching of high & low bands and mid bands between SSL’s E & G series console EQ characteristics to provide an even more versatile EQ design.
Key features of the X-Rack Stereo EQ Module include:

Stereo version of the XL 9000 K Channel Equaliser as used on Duality & AWS consoles
‘Selective Mode’ E and G characteristic switching, which enables independent switching of high & low bands and mid bands between E or G curves
High and low-bands switchable between shelving and fixed Q Bell curves
EQ IN switch for A/B comparison
Rear panel connections on balanced TRS Jack
TotalRecall™ status LEDs

Tags:SSL, XRACK, ANALOG

Free iPhone / iPod / iPad App for SSL X-PATCH

13/07/2010 09:23 AM

Die X-Patch Remote Control sucht alle an einem WiFi Nezwerk angeschlossenen X-Patch.
Mit dem iPhone App können alle 128 Speicherplätze eines X-Patch aufgerufen werden. Gibt es mehrere X-Patch in einem WiFI Netzwerk wird jedes X-Patch einzeln ausgewählt und bedient.

Download X-Patch App vom Apple online store:
http://itunes.apple.com/us/app/x-patch-remote-control/id378120888