Patton HDMI-DANTE AV Transmitter

SKU: FPX 6000-T

Patton’s FPX6000 enables Dante AV with 8 audio channels (transmit or receive) and 1 HDCP encryption support video channel (transmit or receive) to be easily inserted onto an existing Ethernet network backbone without suffering the performance issues and management difficulties associated with audio and video over IP.

Dante’s sub-microsecond synchronization of audio and video eliminates alignment problems. Dante AV uses a single network clock for the entire system in sync regardless of the number of endpoints, transporting audio and video with low deterministic latency.

In addition to providing high performance Dante AV with audio/video-over-IP, the FPX6000 is loaded with peripheral connectivity options including USB 2.0 and USB OTG for keyboard and mouse, infrared for remotes, even serial signals for PTZ control and more… all over IP!

The Controller makes routing, controlling and monitoring your audio and video traffic and endpoints as simple as clicking a button.

*Up to eight channels at 44.1, 48, 88.2 or 96 kHz. 24, 16, and 32 bits per audio sample. HDCP sourced audio channels limited to 48 kHz
* High-quality, low jitter with on-board clock generator for audio
* Built-in 8-channel asynchronous sample rate converter
* Dante Audio over IP, AES67 RTP
PoE (PD-Powered Device)

Hardware time-stamping, supporting sample-accurate playback
Audio Flows In/Out: Up to 8x8 (unicast or multicast)
Video Flows In/Out: 1x1 (unicast or multicast)

1 HDMI 2.0/1.4b input (T model) or output (R model)
Latency: 8-ms delay from HDMI input to HDMI output for a 60-Hz video
Built-in HDCP encryption/decryption for video
HDCP 2.2 input/output, HDCP 2.3 over network
800 Mbps recommended maximum bit rate
Accepts any bit stream from external codec
Up to 4K60 input/output
HDR support
HDMI monitor output loop-through (T model)

Control Interfaces(Peripherals)
2 x USB 2.0 Type A for keyboard and mouse
USB On The Go (OTG) for keyboard and mouse
RS422/VISCA for PTZ camera input control (RJ45)
IR 3mm infrared control over IP
Panel Status LEDs

Dante software
Dante software/system
Clock Synchronization (master, slave, progress)
HDCP status
Full Dante API support
Support for HDMI management
Support for fully validated HDCP management
EDID management
Serial/IR/USB HID/CEC over IP support

48 VDC 0.75 A input
802.3bt (60–90W)
Operational Temperature
32–104°F (0–40°C)

Product Information:

Manufacturer: PATTON


All prices incl. 20% VAT